| key |
id |
string(7)* |
= |
The id field uniquely identifies the vessel record. |
| timeline |
lastUpdateDate |
dateTime* |
=< >= |
The last time the vessel record was updated. This refers to the full record. |
| link |
batch |
Batch* |
= |
The Batch for which this BatchRun is an instance. |
| link |
batchRun |
BatchRun* |
= |
The BatchRun in which the Instrument is delivered. |
|
callSign |
string(13) |
|
Alphanumeric identifier (maximum 7 characters) used for vessel radio communications. Each flag authority has a designated call sign range which is issued by a national radio authority. A call sign should be in accordance with article 19, section III of the radio regulations (RR). If vessel ownership changes, flag authority often changes and consequently callsign changes. |
|
companyIdDocCompany |
long(-2147483648,2147483647) |
|
S&P Cap IQ Company ID for the document of compliance (DOC) company. |
|
companyIdGroupBeneficialOwner |
long(-2147483648,2147483647) |
|
S&P Cap IQ Company ID for the group beneficial owner. |
| filter_list |
companyIdOperator |
long(-2147483648,2147483647) |
= |
S&P Cap IQ Company ID for the operator. |
| filter_list |
companyIdRegisteredOwner |
long(-2147483648,2147483647) |
= |
S&P Cap IQ Company ID for the registered owner. |
|
companyIdShipManager |
long(-2147483648,2147483647) |
|
S&P Cap IQ Company ID for the ship manager. |
|
companyIdTechnicalManager |
long(-2147483648,2147483647) |
|
S&P Cap IQ Company ID for the technical manager. |
|
deadweight |
long(-2147483648,2147483647)* |
|
The weight in metric tons (1000kg) of cargo, stores, fuel, passengers and crew carried by the ship when loaded to its maximum summer draught. In certain cases, this field may show an alternate lower load line deadweight (dwt) value as published by the vessels classification society in their web portal. |
|
docCompany |
string(50) |
|
The company stated on a document of compliance (DOC) certificate. This company is responsible for implementing the safety management system under the international safety management (ISM) code. When a certificate expires, the company will be removed from the data field and 'unknown' will be inserted until new details are available. |
|
docCompanyCode |
string(7) |
|
The unique identifier for the document of compliance (DOC) company. The International Maritime Organization (IMO) unique company and registered owner identification number scheme was introduced through the adoption by the maritime safety committee (MSC), at its seventy-eighth session (12 to 21 May 2004), of resolution MSC.160(78), as a measure to enhance maritime safety, security and environmental protection, and to facilitate the prevention of maritime fraud. Its purpose is to assign a permanent number for identification purposes to each company and/or registered owner managing ships of 100 gross tonnage and above engaged on international voyages. Additionally, administrations are invited to participate in the scheme to the extent they desire by assigning an IMO unique company and registered owner identification number to each company and/or registered owner managing ships of 100 gross tonnage and above not engaged on international voyages. Official IMO company numbers begin with the prefix IMO company, IMO registered owner or IMO document of compliance. |
|
docCountryOfRegistration |
string(50) |
|
The name of the country in which the DOC company is legally incorporated. |
|
docCountryRegistrationCodeIso2 |
string(2) |
|
The ISO-3166-1 two-character country code representing the DOC companys country of registration. |
|
exName |
string(50) |
|
The previous name of the vessel, if applicable. This will only display the most recent in the case of several historical names. |
|
flagCode |
string(3)* |
|
A proprietary three-character code to represent the flag of registry, also known as the ships flag or flag state. The code indicates the country where a ship is registered, giving it the physical and legal protection of that state and making the flag state responsible for its regulation, inspection, and certification. This registration allows the ship to operate under that countrys laws, ensuring safety, environmental protection, and crew welfare. The code for a countrys international registry is distinct from the code for the main register, e.g., NOR for the Norwegian flag register, NIS for the Norwegian international register. If the code starts with an X, it is considered a false flag showing it appears as registered without the permission or authority of the flag administration. |
|
flagIso2Code |
string(2) |
|
The ISO 3166-1 two-character country code representing the country where the ship is registered. There are instances where a vessel is considered to be flying a false flag and no ISO country code will displayed in these instances. International registries will have the ISO code for the country, for example, the Norwegian international register will have the ISO code for Norway. |
|
flagName |
string(50)* |
|
A flag of registry, also known as the ships flag or flag state, indicates the country where a ship is registered, giving it the physical and legal protection of that state and making the flag state responsible for its regulation, inspection, and certification. This registration allows the ship to operate under that countrys laws, ensuring safety, environmental protection, and crew welfare. flag states can have national and international ship registers. Vessels may appear in more than one registry (parallel registry) although only one may be active at any one time. A flag suffixed with FALSE is considered to be flying the flag of a country without the permission or authority of the flag administration. |
|
grossTonnage |
long(-2147483648,2147483647)* |
|
Gross tonnage (GT) is a unitless function of the moulded volume of a vessels enclosed spaces. It is used for setting rules regarding crew size, safety standards, and registration procedures for vessels. It's also used to calculate port dues, canal transit fees, and other charges associated with a ships size. The formula for GT was introduced by the International Maritime Organization (IMO) through the International Convention on Tonnage Measurement of Ships (1969) to create a uniform and universal system for measuring ships worldwide. It is a measure of a vessels total internal volume, not its weight. The formula as defined in the Convention is GT = K x V, where V is the total volume of the ships enclosed spaces in cubic meters, and K is a multiplier calculated as K = 0.2 + 0.02 log10(V). The input unit is cubic meters (m³) and the output is a derived measurement, GT. |
|
groupBeneficialOwner |
string(50) |
|
This is the parent company of the registered owner. It is the controlling interest behind its fleet and the ultimate beneficiary from the ownership. A group beneficial owner may or may not directly own ships itself as a registered owner. It may be the manager of its fleet, which is in turn owned by subsidiary companies. Its ships may also be managed by a third party under contract. In some circumstances a ship may be owned by a financial organization who has no operational involvement whatever. In shipping circles, the lessee company, which may also sometimes be referred to as the disponent owner, can also be the group beneficial owner, commercial manager or commercial operator of the ship. |
|
groupBeneficialOwnerCompanyCode |
string(7) |
|
The unique identifier for the group beneficial owner. The International Maritime Organization (IMO) unique company and registered owner identification number scheme was introduced through the adoption by the maritime safety committee (MSC), at its seventy-eighth session (12 to 21 May 2004), of resolution MSC.160(78), as a measure to enhance maritime safety, security and environmental protection, and to facilitate the prevention of maritime fraud. Its purpose is to assign a permanent number for identification purposes to each company and/or registered owner managing ships of 100 gross tonnage and above engaged on international voyages. Additionally, administrations are invited to participate in the scheme to the extent they desire by assigning an IMO unique company and registered owner identification number to each company and/or registered owner managing ships of 100 gross tonnage and above not engaged on international voyages. Official IMO company numbers begin with the prefix IMO company, IMO registered owner or IMO document of compliance. |
|
groupBeneficialOwnerCountryOfDomicile |
string(50) |
|
Country of domicile is also known as the country of residence. This indicates the country where the company is domiciled. All companies must have a country of domicile, which may be care of (c/o) of a ship manager. This is not always the same as the country of registration, and in some cases, it may differ from the country of control. |
|
groupBeneficialOwnerCountryOfRegistration |
string(50) |
|
The name of the country in which the group beneficial owner is legally incorporated. |
|
groupOwnerCountryDomicileCodeIso2 |
string(2) |
|
The ISO-3166-1 two-character country code representing group beneficial owners country of domicile. |
|
groupOwnerCountryRegistrationCodeIso2 |
string(2) |
|
The ISO-3166-1 two-character country code representing group beneficial owners country of registration. |
|
imoOrShipNo |
string(7)* |
|
The ship number originates from the LR (Lloyd's Register) ship numbering system and is implemented for the International Maritime Organization (IMO) by S&P Global. The numbering schema is defined under UN resolution A.1117(30) with carriage requirements defined under The International Convention for the Safety of Life at Sea (SOLAS) Chapter XI-1, regulation: 3. Not all ship numbers are considered official IMO numbers and must meet the criteria listed in IMO Resolution A.1117(30). All official IMO numbers must be displayed on a ship's hull or superstructure, or on a horizontal surface for passenger ships, in a visible, permanent and contrasting color. IMO numbers are only assigned once and can not be transferred to another vessel. An official IMO number is represented by 'IMO' in front of the number. |
|
maritimeMobileServiceIdentityMmsiNumber |
long(-2147483648,2147483647) |
|
Maritime Mobile Service Identities (MMSI) are nine-digit numbers used by maritime digital selective calling (DSC), automatic identification systems (AIS) and certain other equipment to uniquely identify a ship or a coast radio station. MMSIs are regulated and managed internationally by the International Telecommunications Union in Geneva, Switzerland, just as radio call signs are regulated in Recommendation ITU-R M.585. An MMSI is assigned to a transmitter and may be transferred to another transmitter following the appropriate issuers policy. If a vessels flag changes, MMSI changes. |
|
operator |
string(50) |
|
The name of the company responsible for the commercial decisions concerning the employment of a ship and therefore who decides how and where that asset is employed. The direct beneficiary of the profits from the operations of the ship, this company may also be responsible for purchasing decisions on bunkers and port services. A medium to long-term time or bareboat charterer is considered to be the operator of the ship. Vessels within commercial pools are considered to be operated by the pool. |
|
operatorCompanyCode |
string(7) |
|
The unique identifier for the operator. The International Maritime Organization (IMO) unique company and registered owner identification number scheme was introduced through the adoption by the maritime safety committee (MSC), at its seventy-eighth session (12 to 21 May 2004), of resolution MSC.160(78), as a measure to enhance maritime safety, security and environmental protection, and to facilitate the prevention of maritime fraud. Its purpose is to assign a permanent number for identification purposes to each company and/or registered owner managing ships of 100 gross tonnage and above engaged on international voyages. Additionally, administrations are invited to participate in the scheme to the extent they desire by assigning an IMO unique company and registered owner identification number to each company and/or registered owner managing ships of 100 gross tonnage and above not engaged on international voyages. Official IMO company numbers begin with the prefix IMO company, IMO registered owner or IMO document of compliance. |
|
operatorCountryOfRegistration |
string(50) |
|
The name of the country in which the operator is legally incorporated. |
|
operatorCountryRegistrationCodeIso2 |
string(2) |
|
The ISO-3166-1 two-character country code representing the registered owners country of registration. |
|
pandiClub |
string(100) |
|
The name of the Protection & Indemnity (P&I) insurance Club associated with the vessel. The P&I Club is a non-profit, mutual insurance association where shipowners and operators pool their resources to cover third-party liabilities and risks, such as cargo damage, pollution, and injury to crew or third parties. |
|
portOfRegistry |
string(50) |
|
A port of registry is the official location (and often a port location) where a ship or boat is registered, which determines its legal and regulatory framework, its flag, and its nationality under international law. This information is marked on the vessel, along with its official number and tonnage, to identify it and establish which nations maritime rules it must follow. |
|
portOfRegistryFullCode |
string(7) |
|
The unique identifier designated for each port of registry. An example would be Piraeus, which has a three-character code to indicate the country location (which will match the flagCode) and is suffixed by a numerical code to indicate precise location within the country: GRC0825. |
|
registeredOwner |
string(50) |
|
The legal title of ownership of the vessel that appears on the ships registration documents. It may be an owner/manager or a wholly-owned subsidiary in a larger shipping group; or a bank or one-ship company vehicle set up by the bank; or of course, it may be a 'brass-plate' company created on paper to legally own a ship and possibly to limit liability for the 'real' owners and/or benefit from off-shore tax laws. It may be a legal requirement of the flag state with whom the ship is registered for the legal owner to be a company registered in that country. |
|
registeredOwnerCode |
string(7) |
|
The unique identifier for the registered owner. The International Maritime Organization (IMO) unique company and registered owner identification number scheme was introduced through the adoption by the maritime safety committee (MSC), at its seventy-eighth session (12 to 21 May 2004), of resolution MSC.160(78), as a measure to enhance maritime safety, security and environmental protection, and to facilitate the prevention of maritime fraud. Its purpose is to assign a permanent number for identification purposes to each company and/or registered owner managing ships of 100 gross tonnage and above engaged on international voyages. Additionally, administrations are invited to participate in the scheme to the extent they desire by assigning an IMO unique company and registered owner identification number to each company and/or registered owner managing ships of 100 gross tonnage and above not engaged on international voyages. Official IMO company numbers begin with the prefix IMO company, IMO registered owner or IMO document of compliance. |
|
registeredOwnerCountryOfRegistration |
string(50) |
|
The name of the country in which the registered owner is legally incorporated. |
|
registeredOwnerCountryRegistrationCodeIso2 |
string(2) |
|
The ISO-3166-1 two-character country code representing the registered owners country of registration |
|
shipManager |
string(50) |
|
The company name designated by the ship owner or charterer to be responsible for the day-to-day commercial running of the ship and the best contact for the ship regarding commercial matters. Including post fixture responsibilities, such as laytime, demurrage, insurance and charter clauses. This company may be an owner related company, or a third-party manager, whose purpose is primarily the management of ships for their ship-owning clients. In some circumstances a ship may be owned by a financial organization who has no operational involvement whatever. The lessee company, or one of its subsidiary companies, may be deemed to be the commercial manager of the ship. |
|
shipManagerCompanyCode |
string(7) |
|
The unique identifier for the ship manager. The International Maritime Organization (IMO) unique company and registered owner identification number scheme was introduced through the adoption by the maritime safety committee (MSC), at its seventy-eighth session (12 to 21 May 2004), of resolution MSC.160(78), as a measure to enhance maritime safety, security and environmental protection, and to facilitate the prevention of maritime fraud. Its purpose is to assign a permanent number for identification purposes to each company and/or registered owner managing ships of 100 gross tonnage and above engaged on international voyages. Additionally, administrations are invited to participate in the scheme to the extent they desire by assigning an IMO unique company and registered owner identification number to each company and/or registered owner managing ships of 100 gross tonnage and above not engaged on international voyages. Official IMO company numbers begin with the prefix IMO company, IMO registered owner or IMO document of compliance. |
|
shipManagerCountryOfRegistration |
string(50) |
|
The name of the country in which the ship manager is legally incorporated. |
|
shipManagerCountryRegistrationCodeIso2 |
string(2) |
|
The ISO-3166-1 two-character country code representing the ship managers country of registration |
| filter_list |
shipName |
string(50) |
= |
The vessels name in English format, as recorded by the vessels registration authority. To avoid problems with fonts and characters sets the name may use nearest equivalent English character. |
|
shipStatus |
string(50)* |
|
Ship statuses |
|
shiptypeLevel2 |
string(100)* |
|
Level 2 ship types, based on the hierarchical StatCode5 ship type coding system. Level 2 is the broad type category such as 'Tanker' or 'Bulk Carrier'. |
|
shiptypeLevel3 |
string(100)* |
|
Level 3 ship types, based on the hierarchical StatCode5 ship type coding system. Level 3 is the general design type or cargo group such as 'Liquified Gas' or 'Bulk Dry'. |
|
shiptypeLevel4 |
string(100)* |
|
Level 4 ship types, based on the hierarchical StatCode5 ship type coding system. Level 4 is the general cargo type category such as 'LNG Tanker' or 'Glue Tanker'. |
|
shiptypeLevel5 |
string(100)* |
|
Level 5 ship types, based on the hierarchical StatCode5 ship type coding system. Level 5 is the full design type definition, such as 'A tanker for the bulk carriage of fruit juice concentrate in refrigerated tanks. May be arranged for the additional carriage of containers on deck'. |
|
shiptypeLevel5HullType |
string(100)* |
|
Additional level 5 ship type detail derived from the StatCode5 value. Hull type examples include 'Ship Shape Including Multi-Hulls', 'Ship Shape Semi-Sub'. |
|
shiptypeLevel5SubGroup |
string(100)* |
|
Additional level 5 ship type detail derived from the StatCode5 value. The sub group indicates details such as 'Seaplane Tender' or 'Bulk Aggregates Barge'. |
|
shiptypeLevel5SubType |
string(160)* |
|
Additional level 5 ship type detail derived from the StatCode5 value. Examples include 'LC' (Co2 Tanker), 'LP' (Molten Sulphur Tanker). |
|
statCode |
string(7)* |
|
StatCode5 is an updated version of the original International Classification of Ships by Type (ICST) 1994. It is a 7 character alphanumeric code which has been adopted as the ship type standard. A StatCode5 example would be: A14E2LJ. The code can be broken out and decoded as follows: Level 1 code: A. Level 1 decode: Cargo Carrying. Level 2 code: A1. Level 2 decode: Tankers. Level 3 code: A14. Level 3 decode: Other Liquids. Level 4 code: A14E. Level 4 decode: Fruit Juice Carrier. Level 5 Hull Type code: 2. Level 5 Hull Type decode: Level 5 Sub Type code: LJ. Level 5 Sub Type decode: Fruit Juice Carrier, Refrigerated. Level5 code (the full Statcode5): A14E2LJ. Level 5 decode: A tanker for the bulk carriage of fruit juice concentrate in refrigerated tanks. May be arranged for the additional carriage of containers on deck. |
|
technicalManager |
string(50) |
|
The company name designated by the ship owner or operator or ship manager to be specifically responsible for the technical operation and technical superintendency of a ship. This company may also be responsible for purchases regarding the fleet, such as repairs, spares, re-engining, surveys, dry-docking, etc. |
|
technicalManagerCode |
string(7) |
|
The unique identifier for the technical manager. The International Maritime Organization (IMO) unique company and registered owner identification number scheme was introduced through the adoption by the maritime safety committee (MSC), at its seventy-eighth session (12 to 21 May 2004), of resolution MSC.160(78), as a measure to enhance maritime safety, security and environmental protection, and to facilitate the prevention of maritime fraud. Its purpose is to assign a permanent number for identification purposes to each company and/or registered owner managing ships of 100 gross tonnage and above engaged on international voyages. Additionally, administrations are invited to participate in the scheme to the extent they desire by assigning an IMO unique company and registered owner identification number to each company and/or registered owner managing ships of 100 gross tonnage and above not engaged on international voyages. Official IMO company numbers begin with the prefix IMO company, IMO registered owner or IMO document of compliance. |
|
technicalManagerCountryOfRegistration |
string(50) |
|
The name of the country in which the technical manager is legally incorporated. |
|
technicalManagerCountryRegistrationCodeIso2 |
string(2) |
|
This is the ISO-3166-1 two-character country code representing the technical managers country of registration. |
|
yearOfBuild |
long(1700,3000) |
|
The year the vessel was built and delivered into service or, if newbuild status, the year the vessel is due into service. |